ANALYSIS OF NOISE MEASUREMENTS IN THE WORK AREA TO THE OPERATOR'S HEARING IN THE PROCESS DEPARTMENT USING THE WORK SEMPLING METHOD
Abstract
PT. Ika Bina Agro Wisesa (IBAS) is one of the palm oil mills on the island of Sumatra, Indonesia. This palm oil factory is located in the village of Guha Uleue, Kuta makmur District, North Aceh District, Aceh province. The problem in this study is to identify and deal with the problems encountered by applying theory and concepts with work and idle calculations carried out using work sampling data on 3 operators in the Drying department. The research was carried out with the work and idle calculation time being carried out for 1 week. All Operators working on the production floor work from 08.00 to 16.00 with breaks from 12.00 to 13.00. The number of minutes from 08.00-12.00 and 13.00-16.00 means the total population in this study is 84. The purpose of this study is to analyze the measurement of noise in employees as seen from the effect of noise. The effect of noise will later be used to determine what is the influence of noise by each employee to complete his work in the process department. As for the results of this study there is an analysis of noise measurements using a Sound Level Meter (SLM) which has a noise level between 81.3 dB(A) to 88.9 dB(A). then PT. Ika Bina Agro Wisesa has a hearing protection program contained in the HSE Code of Practice-00612. The results of the study of measuring noise intensity 8 working hours for the operator position on Personal Noise Level dB (A) boiler 84.4, Personal Noise Level dB (A) polishing drum is 81.3, Personal Noise Level dB (A) ripple mill 88.9 and finally Personal Noise Level dB (a) The sterilizer is 67.7. this is in line with the Decree of the Minister of Manpower and Transmigration No. 13 of 2011 and the Decree of the Minister of Energy and Mineral Resources of the Republic of Indonesia No. 1827 of 2018 which is used to analyze and control noise in the processing plant area.
References
Rina, D. N., Sukwika, T., & Abdullah, S. (2021). Gangguan Fungsi Pendengaran Pekerja Operator di Kawasan Bising Departemen Operasi. Journal of Applied Management Research, 1(2), 78-88.
Djalante, S. (2010). Analisis Tingkat Kebisingan di Jalan Raya yang Menggunakan Alat pemberi Isyarat Lalu Lintas (APIL) (Studi kasus: Simpang Ade Swalayan). Jurnal SMARTek, 8(4), 280–300.
Hendrarso, P. (2020, July). Meningkatkan kualitas sumber daya manusia di perguruan tinggi menuju era vuca: Studi fenomenologi pada perguruan tinggi swasta. In Prosiding Seminar STIAMI (Vol. 7, No. 2, pp. 1-11).
Siswa Pratama, S.E.,M.M, Analisa Pengaruh Sumberdaya Manusia, Prasarana Dan Lingkungan Kerja Terhadap Kinerja Studi Pada Pegawai Universitas Pembangunan, Jurnal Manajemen Tools, Vol. 11 No. 1 Juni 2019, Issn : 2088-3145 Panca Budi Medan
Zaw, A. K., Myat, A. M., Thandar, M., Htun, Y. M., Aung, T. H., Tun, K. M., & Han, Z. M. (2020). Assessment of Noise Exposure and Hearing Loss Among Workers in Textile Mill (Thamine), Myanmar: A Cross-Sectional Study. Safety and Health at Work, 11(2), 199–213.
Ibrahim, H., Basri, S., & Hamzah, Z. (2016). Faktor-Faktor yang Berhubungan dengan Keluhan Gangguan Pendengaran pada Tenaga Kerja Bagian Produksi PT. Japfa Comfeed Indonesia, Tbk. Unit Makassar Tahun 2014. Al-Sihah: The Public Health Science Journal, 8(2), 121–129.
A.M. Sugeng Budiono. 2003, Bunga Rampai Hiperkes dan Kesehatan Kerja. Semarang: Badan Penerbit UNDIP.
Septiana, D. 2014. Faktor yang Mempengaruhi Unsafe Action pada Pekerja di Bagian Pengantongan Urea. Jurnal Vol 3, No.1 : 25-34.
Setyawati, L. 2010. Selintas tentang Kelelahan Kerja. Yogyakarta: Amara Books.
Fassa, F., Wibowo, A., & Soekiman, A. (2021). Penyebab dan Dampak Kecelakaan, serta Solusi Keselamatan di Proyek Konstruksi Periode 2016-2020: Tinjauan Literatur. Jurnal Teknik Sipil Universitas Teuku Umar, 7(1), 111-123.
Sucipto, Cecep, 2014. Keselamatan dan Kesehatan Kerja. Yogyakarta: Gosyen Publishing
Swaputri, E. (2010). Analisis Penyebab Kecelakaan Kerja. KEMAS: Jurnal Kesehatan Masyarakat, 5(2).
Nur, M. (2017). Pengaruh Pelaksanaan Program Keselamatan dan Kesehatan Kerja (K3) terhadap Produktivitas Kerja Karyawan pada PT. Bormindo Nusantara Duri. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 3(2), 125-134.
Anshari, M. H., Artika, K. D., & Kuswoyo, A. (2018). Analisa Pengukuran Tingkat Kebisingan Sepeda Motor Berdasarkan Rpm Dan Jumlah Kendaraan. Elemen: Jurnal Teknik Mesin, 5(1), 07-10.
Suma’mur P.K, 1996. Higiene Perusahaan dan Kesehatan Kerja. Jakarta: PT. Gunung Agung.
Rimantho, D., & Cahyadi, B. (2015). Analisis kebisingan terhadap karyawan di lingkungan kerja pada beberapa jenis perusahaan. Jurnal Teknologi, 7(1), 21-27.
K. Reinhold. 2014. Exposure to high or low frequency noise at workplaces: differences between assessment, health complaints and implementation of adequate personal protective equipment. Institute of Business Administration, Tallinn University of Technology, Ehitajate tee 5, EE12618 Tallinn, Estonia
Saremi, Mahnaz. (2015). Combined Effects of Noise and Shift Work on Fatigue as a Function of Age. International Journal of Occupational Safety and Ergonomics (JOSE)
Haryandi, H., Setiawati, V. R., & Mayasisca, M. (2021). Evaluasi Implementasi Hearing Conservation Program Sesuai Niosh Criteria Di Perusahaan Tambang Pt. Abc, Sumbawa Barat, Nusa Tenggara Barat. Jurnal Ilmiah Teknik Industri, 9(3), 188-196.
Irwansyah, D., Erliana, C. I., Fadlisyah, F., Ula, M., Fahrozi, M., & Harun, R. (2022). Increasing Productivity in CPO Production Using The Objective Matrix Method. International Journal of Engineering, Science and Information Technology, 2(2), 14-20.
Peraturan Menteri Kesehatan Republik Indonesia Nomor 70 Tahun 2016 Tentang Standar Dan Persyaratan Kesehatan Lingkungan Kerja Industri
Prasetyaningtyas, H., & Suwandi, T. (2018). Nilai Ambang Dengar Pada Karyawan Bagian Air Separation Plan Di PT. X. Journal of Industrial Hygiene and Occupational Health, 3(1).